Home / Galvanized Steel
Galvanized Steel — GI, Galvalume, PPGI, PPGL
Everything that roofs, walls or clads a building in Africa starts as a coated coil. We stock all four coating families and supply them as coil or as cut-and-formed sheets:
GI (hot-dip galvanized). Zinc-coated steel for roofing, ducting, purlins and general fabrication. Zinc coating designation is stated on every order.
GL (Galvalume, 55% Al-Zn). The default for exposed roofing: better heat reflectivity and longer life in coastal and industrial atmospheres than plain zinc.
PPGI. Paint over galvanized — colour, weather resistance and formability for roofing, wall panels, sandwich panels and doors.
PPGL. Paint over Galvalume for the toughest combination: alloy substrate plus a top paint system (SMP or PVDF), used where heat and UV are extreme.
Specs we quote from
| Base metal thickness | 0.14–2.0 mm (coating counted separately on mill certificate) |
| Coating designations | GI: Z60–Z275 g/m² typical range · GL: standard 55%Al-Zn spangle |
| Paint systems | PE / SMP / PVDF, top & back coat thicknesses on request |
| Widths | 600–1250 mm coil; sheet widths cut to profile |
| Grades | Commercial to structural; GB, ASTM, JIS, EN grade lists available |
| Certificates | Mill MTC every batch; SGS / BV / TUV inspection on request |
Ranges above are our order scope, not stock minima — the actual offer depends on mill schedules at quote time.